
16 kWh of LiFePO4 at 51.2 V with a 6,000 W pure-sine output — a mobile wall of power for whole-boat systems, off-grid cabins and site work, charged from 6,500 W of solar or 2.5-hour AC.
| Battery type | LiFePO4 (LFP) |
|---|---|
| Nominal energy | 16 kWh |
| Nominal voltage | 51.2 V |
| Cycle life | ≥ 6,000 cycles @ 80% SOH |
| Rated power | 6,000 W (peak 12,000 W) |
| Output | Pure sine wave · 230 V / 50 Hz |
| UPS transfer | < 10 ms |
| PV input | 6,500 W max · 60–540 V · 2 × MPPT |
| AC charging | 0–60 A adjustable · fastest charge 2.5 h |
| Parallel / phases | Multi-unit parallel · 3-phase 400 V output supported |
| Protection rating | IP20 |
| Weight | 135 kg |
| Dimensions | 636 × 368 × 900 mm (incl. wheels & handle) |
| Design life | ≥ 10 years |
| Safety | 9 protections: over-charge / over-discharge / over-current / over-voltage / over-temperature / low-temperature / short circuit / overload / fire |
| Certification | EMC tested · RoHS · UN38.3 transport tested |
Specification taken from the manufacturer technical datasheet (abridged EN, 2026). Confirmed per configuration at quotation.
Large capacity plus solar input means the system can run for days, not hours.
House bank replacement with silent AC power on demand.
Critical circuits through outages, with solar recharge.
Cabins and worksites far from the grid.
Capacity and input can be matched to the installation.
Cell layout, protection board, fusing and thermal path — shown on the real unit, not a render.
Slot 04 · link pending
Send the load profile — we size the system and confirm configuration.